help • 11 Devices • Adding CPEs
11.1 Adding CPEs
You can add a CPE (Customer Premise Equipment) in the Operator Portal. This is necessary to be able to assign a telephone to a customer.
* 
Only one type can be provided at a time.
 
To add a CPE
1 Open the Ordering dropdown menu and click on Add MAC CPE under Other.
*The Add CPE page appears.
Label
Explanation
Brand
Select the telephone provider from the dropdown list.
Device
Select the device type from the dropdown list.
Owner
Here you see the preselected wholesaler, to which the device is to be assigned.
Platform
Select the appropriate platform from the dropdown list. Select the option Enreach Contact.
Customer
The client to whom the device is to be assigned. Make sure that you have entered the correct customer. If you leave the field empty, the CPE will automatically be assigned to the owner.
Create channel
Activate this option if you want to create a SIP channel.
Language
Select the language of the device from the dropdown list.
Installation country
Select the country where the device will be installed from the dropdown list.
Area code
Enter the area code for this device. This is needed to determine to which emergency call centre emergency calls must be forwarded when no user is logged on to the phone.
2 Enter the MAC addresses and, optionally, the serial numbers of the devices you want to add.
3 Click on Save.
*The phones are added.