help • 4 Editing General Settings • RemoteConnector for SwyxIt! Define settings
4.10 RemoteConnector for SwyxIt! Define settings
The RemoteConnector for SwyxIt! You can define settings in the Swyx Connectivity Setup Tool from v. 13.20, see help.enreach.com/cpe/latest.version/Administration/Swyx/en-US/#context/help/SCST
You can display these settings.
To display the RemoteConnector settings
1 In the menu, select General Settings | System.
2 Click on RemoteConnector.
Label
Explanation
Activate remote access
Indicates whether connections to clients via the Internet are allowed.
Authentication server
Public server address (FQDN or public IP address) for accessing the authentication service. This address must be configured within the respective settings on the Client computers.
Authentication port
If you use a different standard port and not 9101, it has to be explicitly stated in the Client settings.
Remote Connector server
Public server address of the Remote Connector server.
Remote Connector port
The port of the RemoteConnector server.
The default port is 16203.
3 Click on Save.
To display the Swyx Mobile configuration for all Users
1 In the menu, select General Settings | System.
2 Click on RemoteConnector.
3 Click on or .
Label
Explanation
Internal server
SwyxServer address
External server
RemoteConnector address
Server type
Determined automatically by the installation
Connection mode
Auto (default)
The available network is automatically set
Standard
Internet
Connection type
Business (default)
Data transmission via VoIP
Private
Data transmission via mobile network
Request
You are asked before each telephone call which connection type is to be used.
Remote Connector mode
Auto
An automatic attempt will be made to establish a direct connection to SwyxServer. If the connection fails, e.g. because you are outside your company network, you are connected to SwyxServer via Remote Connector.
Always
The connection to SwyxServer is always made via RemoteConnector for SwyxIt!
If no connection via RemoteConnector is possible, no attempt will be made to establish a connection via your company network.
* 
Select Users from the menu, select the appropriate User and click on Client Settings and RemoteConnector to view the Swyx Mobile configuration for a selected User.