At least one DECT system and one base station must already have been created.
1 Select Devices | DECT.
2 Select the tab Assigned handsets or Unassigned handsets.
3 Click on Create DECT handset.
4 Click on Save.
The new handset appears in the list
Assigned handsets or
Unassigned handsets.
5 Repeat steps 3 and 4 to create more handset objects.
As an alternative to creating handset objects manually, you can import a .CSV file containing the IPEI numbers:
| The IPEI numbers must be placed one below the other. The user name to which the handset is to be assigned must be separated from the number by a semicolon. e.g. 00012 0000136 9;user_1 00012 0000136 9;user_1 00012 0000138 9;user_1 |
| The .CSV file may contain a maximum of 100 entries. |
1 Select Devices | DECT.
2 Select the tab Assigned handsets or Unassigned handsets.
3 Click on Import DECT handsets.
The configuration wizard appears
Import DECT handsets.
4 Click on Select file and select the prepared .CSV file from your file system.
| Click the cross icon to remove the file from the selection. |
5 Click on Upload.
6 If necessary, select the users to which the handsets are to be assigned.
7 Check if all entries have been imported.
In case of failed imports, you can adjust the erroneous lines in the .CSV file or manually create the corresponding handsets one by one in Swyx Control Center.
8 Click on Finish.
The handsets have been registered in the system according to the import result and appear in the list
Assigned handsets or
Unassigned handsets.