General Information on SwyxDECT 500

SwyxDECT 500 System 〉 General Information on SwyxDECT 500

A SwyxDECT 500 has two internal antennas.

Power Supply

A PoE (Power-Over Ethernet) supply, class 2 (3.84 to 6,49 watt at 48 volt DC) is required.

Network

RJ45 jack for LAN/PoE

State signaling by LEDs

The SwyxDECT 500 has an LED, which indicates the states of the system.


LED Signal	State
permanent green light	The base station is active, the network registration has been successful.
blinks orange	The base station is being initialized.
blinks red	Voltage present, network registration failed.
off	Base station is inactive.

Reset

By using the reset switch, the base station can be reset to factory settings. Press the reset switch for at least 10 seconds with a pointed tool, until the red LED lights up permanently.