Configure connection via SwyxRemoteConnector
In order for SwyxIt! to set up the connection to SwyxServer via SwyxRemoteConnector, the company network's public IP address must be entered with the corresponding ports in the SwyxIt! connection settings.
How to configure the connection viaSwyxRemoteConnector
1. Install SwyxIt! on the Windows computer.
Weitere Informationen entnehmen Sie der SwyxIt!-Dokumentation.
2. Start SwyxIt!, click on “Settings| Local Settings”, and open the “Local Settings” tab.
3. Click on the "More" button.
The "RemoteConnector" dialog window will appear.
4. Select on of the three connection modes.
Weitere Informationen entnehmen Sie der SwyxIt!-Dokumentation. (Section "Selecting Connection Modes for SwyxRemoteConnector “).
5. In the field "Public server address:", enter the public IP address for the company network and the port configured on the company router for SwyxServer.
6. In the field "Public fallback server address:", enter the public IP address for the company network and the second port configured on the company router for SwyxStandby servers. If you have a second public IP address configured for the standby server, then enter it.
7. Confirm your information by clicking on the "OK" button.
The connection to SwyxServer via RemoteConnector is configured.