SwyxDECT 800 System „ÄČ Installation
A SwyxDECT 800 base station can be attached horizontally as well as vertically.
Fig. K-5: Installation
* Hold the holder with the flat side against the wall, so that the text "TOP" is upwards, and mark the two holes on the wall. The minimum distance between the upper hole and the ceiling or another object above the base station must be 65 mm. If this distance is less than 65 mm, the base station cannot slide into the holder.
* Use of wall plugs: Make two holes with a 6mm drill bit, and insert the wall plug.
* Position the holder with the flat side to the wall, and fix it in place with the two supplied 0.14 in screws.
* Place the base station on the holder and push it downwards, until it clicks into place.