SwyxDECT 500 System Starting the SwyxDECT 500 base station SwyxDECT 500 in a network with DHCP
SwyxDECT 500 in a network with DHCP
* Make a note of the MAC address, which is given on the back of the base station.
* In the DHCP server, check the IP address of SwyxDECT 500 by using the MAC address.
* Enter http://xxx.xxx.xxx.xxx (whereas xxx.xxx.xxx.xxx is the identified IP address) in the address field of the web browser.
The home page of the SwyxDECT 500 web interface appears. Here you can configure the base station.
Alternatively, you can identify an existing IP address via the DECT handset, even when the handset is not registered on the base station.
How to identify the IP address of the base station via the DECT handset
1 Press the menu button of the DECT handset.
2 Enter "*47".
3 The IP search starts. Wait up to 30 seconds.
4 The MAC and the IP address of the base station are displayed. By comparing the displayed MAC address with the MAC address on the SwyxDECT 500 type label, you can verify that the handset has found the desired base station.
5 If several base stations exist, their MAC and IP addresses are also displayed. Use the navigation key to scroll through the base station information.