System Information
|
Status of the multi cell system.
|
Last packet received from IP
|
IP address of the last synchronized base station or repeater + time of synchronization.
|
Multi Cell system
|
To enable the multi cell mode of the Enreach DECT 600, this option must be enabled.
|
Multi Cell ID
|
Displays the ID unique to a particular multi-cell. The System chain ID is not editable.
|
Synchronization time (s)
|
The duration in seconds after which links of base stations are synchronized with each other.
|
Data Sync
|
The DECT base stations are synchronized with each other via the network. Two types of synchronization can be selected:
Multicast (recommended):
Simultaneous distribution of synchronization data to all connected base stations. This function must be supported by the network hardware (switches). If this is not the case select Peer-To-Peer.
Peer-To-Peer:
With Peer-To-Peer, each base station is given another base station as a synchronization target. All base stations in the system are synchronized in the process. Then enter the corresponding IP address manually at Primary Data Sync IP.
|