help • App. K: Devices • Configuration of the Terminal Devices in SwyxIt! Classic
K.2 Configuration of the Terminal Devices in SwyxIt! Classic
Most of the terminal devices can be configured in SwyxIt! Classic.
Configuration of the Output
You can specify which terminal device should be used on the PC in the local settings for SwyxIt! Classic (menu "Settings | Local Configuration", on the "Audio Mode" tab). Here, you can specify different devices for:
*the audio mode "Handset",
*the audio mode "Headset",
*the audio mode "Handsfree",
*the option "Open listening" and
*the output of the ringing tone.
Configuration of SwyxPhone Lxxx
The configuration of a SwyxPhone Lxxx can be carried out easily using SwyxIt! Classic. While doing so, you can
*define the phone buttons and
*assign the phone buttons (e.g. with phone numbers).
Configuration of Call Signaling
A user status (available, away, speaking, logged off) can be signaled to other users.
If several terminal devices (SwyxIt! Classic, SwyxPhone, SIP device) are logged on under the same user account, you can indicate which type of terminal device should signal the status of the user.
Use of a Headset with a SwyxPhone Lxxx
Frequent callers can connect a headset directly to a SwyxPhone Lxxx. If SwyxPhone Lxxx has a headset connection, you can configure its behavior in the user profile under the "SwyxPhone" tab. The following options are available:
*Option "Use SwyxPhone with headset" not activated
If the handset is down, the hands-free functionality is enabled in case of an incoming call. In this case, the connected headset will not be activated until the Headset button on the phone is activated.
*Option "Use SwyxPhone with headset" activated
The acoustic output of the phone is signaled through the headset connection. The handsfree phone is then activated by pressing the Speaker button on the phone.