help • 26 Cross-network connections • WAN connections • Small Office - Connection
26.2.1 Small Office - Connection
This section describes how to create a connection between networks in which SwyxWare is installed.
Fig. 26-3: Location Link for Small Office
You have a location at London (A) (headquarters) with a SwyxServer and an ISDN trunk (SwyxGate). A second location in Liverpool (B) (Small Office) is already connected to the Remote Access Server in London (A) using an IP connection, via either the Internet or a permanent line. In this case, the IP telephones or telephone clients connected at the Liverpool location (B) are managed at the London location (A) and external calls are made via the SwyxGate in London (A).
Configuration of SwyxIt! Classic
SwyxIt! Classic is configured for voice compression with low bandwidth according to the description found in 26 Configuration of SwyxIt! Classic .
Configuration of SwyxPhone
The configuration for SwyxPhone is carried out in SwyxServer only.
How to configure SwyxPhone for a WAN connection
1 Open SwyxWare Administration and open the "Properties" dialog for the corresponding SwyxPhone user.
2 Go to "Settings|Administration..." and open the "SwyxPhone" tab.
3 Then, in the "SwyxPhone" field, activate the option "Always compress voice data".
Data compression for SwyxPhone is a user property, which means if a different Small Office user logs in to SwyxPhone, then compression will also need to be configured for that user in SwyxServer.
* 
Additional SIP devices within the Small Office also have to support compression.