help • 1 Operating an Enreach DECT 600 system with SwyxWare • Start the base station
1.6 Start the base station
The Enreach DECT 600 is preset to use a DHCP server. When first switched on, it automatically obtains an IP address of a DHCP server.
Enreach DECT 600 in a network with DHCP
*Make a note of the MAC address, which is given on the back of the base station.
*In the DHCP server, check the IP address of the Enreach DECT 600 against the MAC address.
*Enter http://xxx.xxx.xxx.xxx (whereas xxx.xxx.xxx.xxx is the identified IP address) in the address field of the web browser.
The main page of the Enreach DECT 600 web interface will open. Here you can configure the base station.
Alternatively, you have the option of determining an existing IP address via the DECT handset without the handset already being registered with the base station.
How to identify the IP address of the base station via the DECT handset
1 Press the menu button of the DECT handset.
2 Enter *47*.
*The IP search starts. Wait up to 30 seconds.
*The MAC and the IP address of the base station are displayed.
3 By comparing the displayed MAC address with the MAC address on the nameplate of the Enreach DECT 600, you can check whether the handset has really found the desired base station.
4 If several base stations exist, their MAC and IP addresses are also displayed. Use the navigation key to scroll through the base station information.