D.1.5 Configuration of the ISDN trunk group and ISDN trunks (SwyxGate lines)
To connect a sub-PBX to SwyxServer, a corresponding ISDN trunk group (SwyxGate lines) must be configured.
How to configure the ISDN trunk group and trunks to the sub-PBX
2 In the context menu, select "Properties".
3 On the "Profile" tab, select the profile "Internal Lines".
The number format is set according to the default setting.
4 Leave the public line access blank. In this case, Swyx is the primary telecommunications system.
5 If other number ranges are used in the range of the sub-PBX, configure the number replacement accordingly.
6 On the "Forwarding" tab, you can specify which calls from Swyx are forwarded to the sub-PBX.
7 On the "Rights" tab, you can specify the rights associated with calls made from this sub-PBX to Swyx—for example, whether they may be routed to the public telephone network.
8 Select the location of the sub-PBX on the "Location" tab.
9 End the configuration of the ISDN trunk group with "OK".
10 Next, set up one or more ISDN trunks belonging to this trunk group. You can allow only incoming or only outgoings calls for these, for example.
|
|
If you configure spontaneous trunk retrieval on the sub-PBX, the extensions within the sub-PBX will behave as if they were connected directly to Swyx.
|