26.1.3.1 Configure connection via RemoteConnector
 
To enable the connection of SwyxIt! to SwyxServerviaRemoteConnector, enter the following information in the "Public server address" field since v12.20 and later:
The public endpoint (as FQDN or IP address) of the company network with corresponding ports over which the Authentication Service must be entered in the connection settings of SwyxIt!. For example, connect.server.net:9101
 
How to configure the connection via RemoteConnector
1 Install SwyxIt! on the Windows computer.
2 Start SwyxIt!, click on "Settings| Local Settings", and open the "Local Settings" tab.
3 Click on the "More" button.
The "RemoteConnector" dialog window will appear.
4 Select on of the three connection modes.
5 Enter the public IP address of the company network and the port via which the authentication service can be reached in the "Public server address:" field.
6 Confirm your information by clicking on the "OK" button.
The connection to SwyxServer via RemoteConnector is configured.
 
In SwyxON, the password for the generation of the Client certificate is not required.