help • 8 Creating and editing UC Tenants • Set VPN settings for UC Tenants (Create Offices))
8.18 Set VPN settings for UC Tenants (Create Offices))
UC Tenants are connected to SwyxON via VPN. The settings required for this purpose are combined under the name of "Office" in SwyxON. An Office must be created for each location.
* 
As of SwyxON version 3.00, the IKEv1 protocol is no longer supported:
- No new offices can be created with this VPN type.
- An editing of existing IKEv1 offices is blocked.
 
* 
If at least one of your UC Tenants uses the VPN protocol IKEv1, you cannot create any new Offices. You must convert all IKEv1 offices to IKEv2, see 8.18.1 Convert IKE v1 Offices to IKE v2
 
To define the VPN settings for a UC Tenant
1 Select in the menu UC Tenant.
*A list appears with all UC Tenants or the selected Partner’s UC Tenants.
2 In the row of the corresponding UC tenant, click on Select.
*The submenu for UC Tenant. You can edit the settings for the selected UC Tenant.
3 Select in the menu UC Tenant | Network.
*A list appears with the Offices of the selected UC Tenants.
4 Click on Add Office.
*The configuration wizard appears Add Office.
5 Define the general settings for the Office.
Label
Explanation
Name
Enter a name for the Office.
6 In the Configuration Wizard , click on "Next".
7 Set the subnet settings for the Office.
* 
You can add further subnets later on.
 
Label
Explanation
Subnet address
Enter the Offices subnet address.
Subnet mask
Enter the Offices subnet mask.
8 Click on Create.
* 
If you change the settings for one of several of the customer’s Offices, the connection to other locations might be interrupted. Reestablish the VPN connection after you have made your changes to restore the functionality.
 
*The Office is displayed in the list of Offices.