12.3 DECT telephones
You can connect SwyxPhones of the DECT 800 series in your local network with SwyxServer/NetPhone.
There are two different variants for the provision and activation of DECT 800 systems:
Provisioning in Swyx Control Center via DCF for DECT
(Available from SwyxWare/NetPhone 13.00)
This variant is described in this chapter. It is simpler, takes less time and also offers the following DCF for DECT functionality:
Access to the global phone book
Simple switching of the CTI+ mode
Call pick-up
Synchronization with the SwyxWare user account:
- Call journal
- Speed dial buttons
|
If you use or want to use your DECT system in combination with "Unite", you must configure the DECT system conventionally and do without the DCF-based functions.
|
|
The following functions are currently not available within the DCF provision, but can be configured manually via the administration web interface of the base station: - Provisioning of IP DECT gateways, - Set up more than one synch region, - Connection of base stations from other subnets, see 12.3.1.6 Configure subnet base stations (optional)
|
Conventional configuration (without DCF) of all individual DECT components
You must select this variant if you absolutely want to use the following functions:
Support for the mirror function
A hybrid scenario with activated extensions or "Unite" functionality.
Detailed documentation on conventional configuration can be found at: