12.3.1.4 Create DECT handsets
At least one DECT system and one base station must already have been created.
|
Make sure that the SIP login data is entered for the desired users: User | <Username> | SIP
|
|
Have the IPEI number of the DECT handset ready. You will find the IPEI number on the handset packaging. To display the IPEI number on the handset, dial *#06#
|
To create DECT handsets manually
1 Select Terminals | DECT.
2 Select the tab Assigned handsets or Unassigned handsets.
3 Click on Create DECT handset.
4 Click on Save.
The new handset appears in the list
Assigned handsets or
Unassigned handsets.
5 Repeat steps 3 and 4 to create further handset objects.
To import a list of DECT handsetsets
As an alternative to manually creating handset objects, you can import a .CSV file with the IPEI numbers:
|
Enter the following data separated by semicolons: - The IPEI number of the handset, the user name to which the handset is to be assigned, if applicable (optional), - the name of the DECT system to which the handset is to be assigned, if applicable (optional). - The entries must be one below the other. e.g. 00012 0000135 9 00012 0000136 9;user_1 00012 0000136 9;user_1 00012 0000138 9;user_2;DECT_System01
|
|
The .CSV file must not contain more than 100 entries.
|
1 Select Terminals | DECT.
2 Select the tab Assigned handsets or Unassigned handsets.
3 Click on Import DECT handsets.
The configuration wizard appears
Import DECT handsets.
4 Click on Select file and select the prepared .CSV file from your file system.
|
Click the cross icon to remove the file from the selection.
|
5 Click on Upload.
6 If necessary, select the users to which the handsets are to be assigned.
7 Check if all entries have been imported.
If imports fail, you can adjust the incorrect lines in the .CSV file or manually create the corresponding handsets in Swyx Control Center.
8 Click on Finish.
The handsets have been registered in the system according to the import result and appear in the list
Assigned handsets or
Unassigned handsets.