help • 12 Devices • DECT telephones • Provisioning the DCF DECT system • Configuring subnet base stations for DECT 800 (optional)
12.3.1.8 Configuring subnet base stations for DECT 800 (optional)
If a base station is operated in a subnet, this base station must be added to the DECT system manually.
To configure subnet base stations
The base station object was created in Swyx Control Center, see 12.3.1.4 Create DECT base station(s).
1 Enter 'https://<IP address of the subnet base station>' in the address bar of your browser to open the administration web interface of the base station.
*The login dialog appears.
2 Enter the default name "admin" and the default password "changeme".
3 Click Login and subsequently OK.
*The Ascom configuration wizard appears.
4 Go through the configuration wizard by clicking on Next until you reach the page Radio.
5 On the page Radio enter the following settings:
Label
Explanation
Name
Enter "DECT".
Password
Enter the activation key under Password.
(The activation key can be found in Swyx Control Center under Devices | DECT | DECT Base Stations | Edit DECT Base Station).
PARI Master IP Address
Enter the IP address of the base station in the address bar of a browser.
* 
If the configuration wizard is not displayed, you can find these settings on the administration interface under DECT | Radio.
 
6 Click on OK.
7 Restart the base station.