help • 12 Devices • DECT telephones
12.3 DECT telephones
You can connect SwyxPhones of the DECT 800 and DECT 600 series in your local network to SwyxServer.
There are two different variants for the provisioning and activation of DECT systems:
1) Provisioning in Swyx Control Center via Device Connection Framework (DCF) for DECT
Where possible, the Device Connection Framework is based on the RFC standards and defines clear interfaces for other areas. DCF works not only for calls, but also for CTI and remote control functions for SIP telephones.
Provisioning via DCF is described in this chapter. It is simpler, takes less time and also offers the following DCF for DECT functionality:
*Access to the global phone book
*Call pick-up
*Simple switching to CTI+ mode (only supported by DECT 800; CTI+ must be specially activated on a DECT 600 handset)
*Synchronization with the SwyxWare user account (only supported by DECT 800)
- Call journal
- Speed dial buttons
* 
If you use or want to use your DECT 800 system in combination with "Ascom Unite", you must configure the DECT system conventionally and dispense with the DCF-based functions.
 
* 
The following functions are currently not available within the DCF provisioning, but can be configured manually via the administration web interface of the base station:
- Provisioning of IP DECT gateways,
- Set up more than one sync region,
- Provisioning of DECT R 600 repeaters for DECT 600 systems,
- Connection of base stations from other subnets, see 12.3.1.8 Configuring subnet base stations for DECT 800 (optional)
 
See also service.swyx.net/hc/en/articles/360000868680-Technical-background-information-about-DCF-Yealink-Phones
2) Manual setup of individual DECT components via the web interface of the base station
You must select this variant if you want to use the following functions:
*Support for the mirror function.
*A hybrid scenario with activated extensions or DECT 800 "Ascom Unite" functionality.
For separate documentation and a description of manual setup via the web interface of the base station DECT 800 see:
 
For the separate documentation and the description of the manual setup via the web interface of the base station DECT 600 L or S base station, see: