help • 12 Devices • DECT telephones • Provisioning the DCF DECT system • Configuring subnet base stations for DECT 600 (optional)
12.3.1.9 Configuring subnet base stations for DECT 600 (optional)
If your base stations are operated in different subnets and no direct IP multicasting is possible for these, a base station (e.g. the master base station) must take over the corresponding synchronization of the DECT system. The IP address of this master base station must be entered in all base stations of the DECT system.
* 
You can temporarily assign any password for logging on to the base station. After successful synchronization, this password is overwritten by the general default password.
 
To configure subnet base stations
The base station object was created in Swyx Control Center, see 12.3.1.4 Create DECT base station(s).
1 Enter 'https://<IP address of the base station>' in the address bar of your browser to open the administration web interface of the base station.
*The login dialog appears.
2 Enter the default name "admin".
3 If necessary, assign a temporary password or use the general password. This can be found under General settings | System | Provisioning | Administrative device password for certified phones.
4 Click on Sign In.
*The web interface of the base station appears.
5 Select Multi Cell in the menu.
6 In the Data Sync field, select the Peer-to-Peer option.
7 In the Primary Data Sync IP field, enter the IP address of the base station that you want to set as the main base station.
8 Click on Save and Reboot.
*The base station is restarted
9 Repeat steps 1 to 7 for all base stations in the DECT system (including the master base station). For the master base station enter its own IP address.