help • 12 Devices • DECT telephones • Edit DECT systems • Edit DECT base station
12.3.2.2 Edit DECT base station
You can assign DECT base stations to another DECT system or one or change the name.
1 Select Devices | DECT.
2 Select the tab DECT base station.
*The list of DECT systems appears.
3 In the row of the corresponding DECT base station, click to edit the base station:
Label
Explanation
Name
Enter a unique name for the DECT base station.
DECT system
Select an existing DECT system to which the base station is to be assigned.
Firmware version
The installed firmware version
Device type
The manufacturer model
Master
The control panel shows whether this base station is configured as a master base station.
Cancel assignment
Click on the button if you do not want to use the base station as a master base station.
You must then set another base station as the "master".
This button is deactivated for a DECT 600 base station. The setting of the master base station is controlled by the system and can be made dynamically depending on the availability of the end device.
Show configuration info
Activate the checkbox to display the provisioning key and the provisioning URL.
MAC-adress
The data required to activate the DECT system, see 12.3.1 Provisioning the DCF DECT system
Click to copy the corresponding data to the clipboard.
Provisioning key
Provisioning URL
4 If applicable, click Save.
To delete DECT base stations
1 Select Devices | DECT.
2 Select the tab DECT base station.
*The list of DECT base stations appears.
3 Click on in the line the corresponding DECT base station to delete one base station or select the corresponding lines and click on Delete multiple DECT base stations.
4 Confirm the process.
*The selected DECT base stations are deleted.