Connection of a SwyxDECT 800 system Configuration of the SwyxDECT 800 Configuration in detail Diagnostics 'Diagnostics | Logging' page
 
'Diagnostics | Logging' page
The base station can generate a number of logs, which can be useful for monitoring and troubleshooting.
Settings
Description
TCP
Recordings relating to the TCP connection setup in the H.225/H.245 protocol.
Gateway Calls
Recording of calls made via the gateway interface.
Gateway Routing
Recording of calls being forwarded via the gateway interface.
H.323 Registrations
Recordings via the RAS registration
SIP/UDP Registrations
Recordings via SIP registration:
SIP/TCP registrations
Recordings via SIP registration:
SIP/TLS registrations
Recordings via SIP registration:
DECT Master
Logs that were generated by the DECT master software component of a base station.
DECT Radio
Logs that were generated by the DECT radio software component of a base station.
SIP/UDP Registrations
Logs that were generated because of SIP registrations.
Config Changes
Logs that were generated because of configuration changes of the base station or the DECT system.
DECT Stack
A "low level" DECT log, to assist the Support department..
Config Changes
Recordings of configuration changes made at the IP DECT base station.
Radio is busy for speech
Activate to send a warning when all voice resources are occupied.
Syslog
Use the 'syslog' link to open a new browser window, which shows a real-time display of the data being logged.