Connection of a SwyxDECT 800 system 〉 Configuration of the SwyxDECT 800
 
Configuration of the SwyxDECT 800
A SwyxDECT 800 must be configured so that it can be reached by SwyxServer. Once this has taken place you can log the DECT handsets on to SwyxDECT 800 and telephone via the SwyxServer.
Use the web interface for configuration of the SwyxDECT 800 base stations.
The following order is recommended for the configuration of the base stations in the IP DECT system:
1. Configuration of the master SwyxDECT 800 (see Configuration of the master SwyxDECT 800 system)
2. Configuration of the standby master SwyxDECT 800 (see Configuration of the standby master SwyxDECT 800)
3. Configuration of slave base stations (see Configuration of a slave base station)
Requirements
The following requirements must be satisfied before you begin the configuration:
*A 10/100base-T10/100base-T Ethernet connection must be available.
*The web browser should support the following functions:
*HTTP 1.1 protocol
*HTML 4.0 protocol
*XML/XSL Version 1.0