Configurations within the SwyxDECT 800 system
There are three ways to add further devices to SwyxDECT 800:
Use of the handset for automatic linking of the IPEI number with a user (anonymous registration)
This procedure is only recommended for D200 and D300.
Manual input of the IPEI number (individual registration)
Only choose this method if your OEM is not supporting an automatic logon.
Importing IPE numbers by means of a CSV file (easy registration)
Choose this procedure, when many users have to be added.
| The IPEI number is an unique identification number of the handset. It appears on the outside of the package for the respective handset! Please keep this number for further use! If you enter a wrong PIN three times, you have to deblock the handset by entering this IPEI number. |
This is how you add a new user to the master base station
1. Select "Users" and click on "new".
| Check that the web browser used is configured to allow popup windows on this page. Otherwise the window for creating a new user will not be displayed. |
2. Specify the user type. You can choose between User and User Administrator. A user administrator can only change settings of the users (excluding the administrator users). An administrator can also change the station settings.
3. Enter further user information.
Long Name
The name of the user. Enter here the SIP user ID from the SwyxWare user configuration.
Display Name
This name is shown on the SwyxPhone Dxxx display during the idle state, if the registration on SwyxWare was successful.
Name
Enter here the SIP user ID from the SwyxWare user configuration. The name has only to be entered in case of H.323 registrations. When using SIP, the field has to be left empty.
Number
Internal number of the user in the SwyxWare
Auth. Name
Password
Enter here the password that was configured as SIP password for this user in the SwyxWare, and confirm.
IPEI / IPDI
Enter here the unique identification number of the SwyxPhone Dxxx.
It is displayed on SwyxPhone D210, SwyxPhone D310 and SwyxPhone D311 when you enter *#34# or *#06#.
For third party devices, the IPEI should likewise be entered here.
Auth. Code
Enter here the authentication code that you have specified for the system (see Section
'DECT | System' page)
4. Click on "OK".
5. To create further users, repeat steps
(3) to
(5).
This is how you assign a SwyxPhone D200 handset to a user (anonymous mode)
1. Select "DECT | System".
2. In the selection field "Subscriptions", choose the entry "With System AC".
3. Enter an authentication code (e.g. 1234) in the field "Authentication Code".
4. Click on "OK".
5. Activate the handset.
The handset display shows "Base PIN".
6. Enter an * (asterisk) followed by the authentication code (e.g. 1234), and press "Yes".
7. Enter the PARK number.
You'll find the PARK number under "Users | Users".
8. Enter "Protection" = "0" (i.e. off) and press the "Yes" button.
The handset searches for the base station and logs on to the system.
9. The IPEI number for the handset appears in the Anonymous list. You can view this list under "Users | Anonymous".
10. Now call the following string with this handset:
*<MasterID>*<internal number>*<authentication code#>
You'll find the MasterID under "DECT | Master". If you enter an authentication code, it must be started with * and concluded with #. If no authentication code is specified, # is not required.
Example:
MasterID "0", user's internal number "200" and authentication code "1234".
Dial: *0*200*1234#
MasterID "0", user's internal number "200" and no authentication code.
Dial: *0*200
By doing this, you assign a registered user to the handset.
11. Hook on after you hear the dial tone.
12. Check that the user assignment was successful. To do this, click on "show" in the web interface under "Users | Users".
A list appears showing all users and their IPEI assignment.
13. Repeat steps
(5) to
(12) with all further handsets.
14. In the web interface under "DECT | System | Subscriptions", select the entry "Disable" to deactivate the anonymous registration.
15. Click on "OK".
This is how you assign a SwyxPhone D300 handset to a user (anonymous mode)
1. Select "DECT | System".
2. In the selection field "Subscriptions", choose the entry "With System AC".
3. Enter an authentication code (e.g. 1234) in the field "Authentication Code".
4. Click on “OK”.
5. Switch on the SwyxPhone D300 handset.
The handset display shows "Subscribe".
6. Enter the park number under "PARK" in the handset. You'll find this in the web interface under "Users | Users".
7. Enter the system authentication code in the handset. Use the same code that you gave in step
(3).
8. Enter a profile name in the handset.
9. Enter "no" in the handset under "Protected", and confirm the input by pressing "Yes".
10. The handset searches for the base station and logs on to the system.
If the logon was successful, "Subscription successful" appears in the display.
11. The IPEI number for the handset appears in the Anonymous list in the web interface. You can view this list under "Users | Anonymous".
12. Now call the following string with this handset:
*<MasterID>*<internal number>*<authentication code#>
You'll find the MasterID under "DECT | Master". If you enter an authentication code, it must be started with * and concluded with #. If no authentication code is specified, # is not required.
Example:
MasterID "0", user's internal number "200" and authentication code "1234".
Dial: *0*200*1234#
MasterID "0", user's internal number "200" and no authentication code.
Dial: *0*200
By doing this, you assign a registered user to the handset.
13. Hook on after you hear the dial tone.
14. Check that the user assignment was successful. To do this, click on "show" in the web interface under "Users | Users".
A list appears showing all users and their IPEI assignment.
15. Repeat steps
(5) to
(14) with all SwyxPhone D300s.
16. In the web interface under "DECT | System |", in the Subscriptions field, select the entry "Disable" to deactivate the anonymous registration.
17. Click on “OK”.
SwyxPhone D210, SwyxPhone D310 and SwyxPhone D311 can be registered via the IPEI No. in a number of ways.
