Configuration as a single-cell system

SwyxDECT 500 System 〉 Configuration of a SwyxDECT 500 base station 〉 Configuration as a single-cell system

How to configure a SwyxDECT 500 base station as a single-cell

1. Define the IP address of the SwyxDECT 500 and gain access to SwyxDECT 500 via the web interface (see also chapter Starting the SwyxDECT 500 base station).

2. Enter the IP address of the base station in the address bar of a browser.

A login window will open.

3. Enter the user name and password. By default the user name and password is "admin" and "admin".

The home page of the web interface to configure the SwyxDECT 500 base station opens.

4. Go to the menu bar and click on "Management | Country setting" and select the country and the desired language. Confirm your selection by clicking on "Save and Reboot".

The system restarts.

5. Select the "Management | Time settings" option, and enter the IP address of your Windows server or a public time server (e.g. ptbtime1.ptb.de) in the field "Time Server". This synchronizes the time being displayed on the DECT handsets.

6. Click on "Save and Reboot".

The system restarts.

7. Select the "Management" option.

8. Give the base station a name.

9. Confirm the entry by clicking on "save".

10. Select the "User | Server" option.

11. Click on "Add server".

12. Deactivate the NAT adaption.

13. Enter the SwyxServer's IP address in the "Registrar" field.

14. Please enter in the field "Secondary Registrar-Address:" the IP-addres of the Standby Server.

15. Activate "SIP Session Timers."

16. Enter the value "90" in the "SessionTimer Value" field.

17. In the field "DTMF signaling", select "SIP-INFO".


	In order to support Codec G.729, an optional module for the base station is required (one module per base station). The codec G.729 should be placed after codec G.711U in the priority list.

18. Click on "Save."

19. Add a new user.For further information please refer to How to add a new user.


	In general: You can save configuration changes by clicking on "save." If there is no "Save" button available on the respective site, changes have to be confirmed by restarting the base station.