1 Determine the IP address of the Enreach DECT 600 and get access to Enreach DECT 600 via the web interface, see
Start the base station.
2 Enter the IP address of the base station in the browser.
A login window will open.
3 Enter username and password. In the delivery state these are admin and admin.
The start page of the web interface for configuring the Enreach DECT 600 base station opens.
4 Select Management | Country and then select the country and the desired language. Confirm the selection by clicking Save and Reboot.
A restart is performed.
5 In the field Time Server, enter the IP address of your Windows server or a public time server (e.g. ptbtime1.ptb.de). This synchronizes the time being displayed on the DECT handsets.
6 Click on Save and Reboot.
A restart is performed.
7 Select Management.
8 Enter a name for the base station.
9 Confirm the entries by clicking Save.
10 Select Extensions | Servers.
11 Select Add server.
12 Disable the NAT Adaption.
13 In the field Registrar enter the IP address of the SwyxServer.
14 In the field Secondary Register Address enter the IP address of the standby server, if necessary.
15 Enable SIP Session Timers.
16 In the field Session Timer Value enter the value '90'.
17 At DTMF Signalling select SIP-INFO.
18 Click on Save.
| In general: You save changes in the configuration by clicking Save. If the page on which you have made the changes does not offer a Save button, the changes must be applied by restarting the base station. |
