help | 1 Operating an Enreach DECT 600 system with SwyxWare | Register handset to Enreach DECT 600
1.7 Register handset to Enreach DECT 600
* 
Make sure that your handset is compatible with the Enreach DECT 600 base station and has the latest firmware.
 
While the base station is in registration mode, you can register the handset with the base station. Have the 4-digit number (access code) ready, which can be found in the menu under Extensions in the AC (Access Code) field.
To connect a handset to Enreach DECT 600 
If the base station is already in login mode, continue with step (4), otherwise start with step (1).
1 In the web interface, select Extensions.
2 Select a user by placing a check mark.
3 Then click on Register Handset(s).
*The login mode is activated.
4 Press the menu key on the handset.
5 On the handset, select Menu | Connectivity | Register.
6 Enter the 4-digit number (AC) and press OK.
*The phone is registered to the base station.
* 
The login mode is not automatically disabled.
To prevent unauthorized logins, disable the logon mode. To do this, select in the web interface Extensions | Stop Registration.
 
Last modified date: 09.08.2023