help | 1 Operating an Enreach DECT 600 system with SwyxWare | Resetting the base station and handsets to factory settings
1.9 Resetting the base station and handsets to factory settings
You can perform the factory reset on the base station or in the web interface.
* 
Note that files and configuration will be lost when resetting the base station.
 
How to reset the Enreach DECT 600 L via the base station 
1 Press and hold the reset switch on the base station, see General information about the Enreach DECT 600 L, with a pointed object for at least 10 seconds until the LED lights up solid red.
*The base station is reset to the factory settings.
How to reset the Enreach DECT 600 L via the web interface 
1 In the web interface, select Management | Default Base Station.
2 Confirm with OK.
*The base station is reset to the factory settings.
To reset your SwyxPhone to factory settings 
Valid for SwyxPhone D510, SwyxPhone D565, HS 630, HS 650 and HS 670.
* 
Note that the handsets must be recommissioned after a factory reset and local files are deleted.
 
1 Press the Menu key (3 horizontal lines).
2 Enter the following combination: [star key], 7, 3, 7, 8, 4, 2, 3, [star key].
*The service menu opens.
3 Select the menu item Master reset and confirm the reset with OK or the select key.
* 
As an aid to thinking, you can remember that the letters of the key combination make the word "service".
 
*The handset is reset. This may take a few minutes.
Last modified date: 09.08.2023