6.8 Access VisualGroups and VisualContacts on a separate server via RemoteConnector
You have Swyx VisualGroups or Swyx VisualContacts not installed on SwyxServer and would like to access the services via RemoteConnector.
![*](bullet_Enreach.svg)
For SwyxWare versions from 13.30, the configuration is carried out via a configuration file. This is described below.
To add a RemoteConnector access via configuration file
1 Open the SwyxWare Administration.
2 Choose your Server and click on Properties....
3 Select Files | Edit....
4 Click on the column heading Category column heading to switch the sorting.
5 Under the category RemoteConnector configuration file category, select the file CPE_ippbx_cpe_rcconfig file.
6 Select Save as... | [Select save path] | Save.
7 Open the file (with Notepad++) and navigate to the section VisualContacts or VisualGroups.
8 In the desired area, enter the following in the line DestinationSocket(...) for 0.0.0.0 enter the desired destination address.
Example:
You want to access VisualGroups via RemoteConnector using your server with the address 255.12.345.6.
<!-- VisualGroups -->
</TCPConfig>
<ClientOS>Windows</ClientOS>
<ClientListenSocket>0.0.0.0:9980</ClientListenSocket>
<DestinationSocket>255.12.345.6:80</DestinationSocket>
</TCPConfig>
9 Save the file.
10 Upload the file in the Files window, see step
(3):
Add... | [...] | [Select file].
11 Choose from Category: RemoteConnector configuration file and confirm with OK.
![*](bullet_green.svg)
The new configuration file is uploaded and used.
|
The previous system default file cannot be removed. The newly uploaded file is used because the Global area has a higher priority than System Default.
|