help • App. B: SwyxIt! Handsets • SwyxIt! Handset Functions in Detail • Headset button (only SwyxIt! Handset P280)
B.2.3 Headset button (only SwyxIt! Handset P280)
Situation
Press the following button:
Result
The handset is on the hook and the phone rings.
Headset
The call takes place via the headset. The LED on the “Headset” button lights up. Pressing the “Headset” button again will end the call.
The handset is on the hook and you are in the middle of a call in "Handsfree” mode.
Headset
The call takes place via the headset. The LED on the “Headset” button lights up. Pressing the “Headset” button again will end the call and the LED turns off.
The handset is on the hook.
Headset
You hear the idle tone through the headset speaker. You are free to dial a number. The LED on the “Headset” button lights up. The resulting call takes place via the headset. By pressing the "Headset” button again, the call is ended and the LED on the Headset button turns off.
The handset is on the hook and the phone rings.
Headset
You take the call via the headset. The LED on the “Headset” button lights up. By pressing the “Headset” button again, the call is ended and the LED turns off.
The handset is off the hook and you are in the middle of a call.
Headset
The call takes place via the headset and the LED on the “Headset” button lights up. You can put the handset back on the hook. To carry on the call with the handset, lift it off the hook again. To terminate the call, put the handset back on the hook again. If you are in "Headset” mode, press the “Headset” button again to terminate the call.
Configuration of a headset, which is not connected via SwyxIt! Handset P280
By default, the SwyxIt! Handset P280 is configured for usage with a headset connected to it.
To use a headset, which is not connected to the SwyxIt! Handset P280 but directly via an USB port, the headset mode of P280 must be disabled manually. Press the headset button of the P280 for at least 5 seconds. When the button is released afterwards, the red LED must blink for 2 seconds. Now P280 is no longer available for the “Headset audio mode” in the audio mode configuration dialogue in SwyxIt!. Additionally the headset button of P280 is inoperable.
By pressing the headset button of SwyxIt! Handset P280 for at least 5 seconds again, this setting is deactivated. For confirmation purposes, the red LED lights up continuously for 2 seconds when the button is released afterwards.