help • 14 Phone Control via PC with SwyxCTI and SwyxCTI+  • Changing the CTI+ mode of an external telephone after logging off, shutting down and restart of SwyxIt!
14.7 Changing the CTI+ mode of an external telephone after logging off, shutting down and restart of SwyxIt!
By activating the checkbox Use CTI each time I start SwyxIt!, you select whether the SwyxIt! CTI mode is active for the current session only or set as default for every start.
When this option is activated before shutting down SwyxIt! , the following note appears after restarting the program (depending on whether the CTI pairing could be established automatically or not:
CTI mode has been established automatically
*Click on Continue Using CTI to further control , the telephony device or an external phone with SwyxIt!.
*Click on Change CTI configuration to configure your CTI pairing.
*Click on Switch off CTI to end the CTI mode and use SwyxIt! in normal mode.
CTI mode could not be established automatically
If a charging circuit appears next to the CTI button after the program has been restarted, this means that the CTI link could not be restored automatically.
It is possible that either SwyxPhone, the telephony device or the external telephone are switched off, or you are not logged on to. Switch on the device or external telephone.