Connection of a SwyxDECT 800 system 〉 Configure DECT handset user 〉 Configurations within the SwyxDECT 800 system 〉 Anonymous Registration for D210, D310
 
Anonymous Registration for D210, D310
When performing an anonymous registration, not the administrator but the user himself registers all handsets. The IPEI is thus automatically linked to the user.
The anonymous registration requires two steps. First, the user is created in the DECT system. Then, the user assigns handset and user via the handset of the user.
How you assign a SwyxPhone D210, SwyxPhone D310 or SwyxPhone D311 handset to a user
1. Select "Administration |Users".
2. Click on "New".
3. Complete the following fields, while leaving the "IPEI/IPDI" field empty. Do not delete the automatically generated "Auth. Code":
Field name
Description
Long Name
Mandatory field: Name of the user - must be unique within the system
Display Name
Optional
Name
When using SIP, this field must be empty!
Number
Mandatory field: Extension - must be unique within the system
Password
The SIP password. The password must be entered into SwyxWare and is thus required during logon.
Idle Display
optional, appears on the display while handset is on hook.
4. Click on "OK".
5. Repeat steps (2) to (4) for all users.
6. Assign the handsets to the users.
7. Select "DECT | System".
8. Select "With System AC" in the "Subscription" list field to activate the anonymous registration.
9. Click on "OK":
10. Run "Over Air Subscription" by using the system authentication code. The IPDI number appears in the "Anonymous" list. To start the list, select "Users | Anonymous".
On the handset, the user has to carry out the following steps:
11. Dial the respective master ID + extension + individual AC code and hang up.
If "0" is the master ID, "200" the extension and "1234" the AC code, the user has to dial "*0*200*1234#" If "200" is already assigned to another handset, this identity will be assigned to the new handset. The old handset is moved to the "Anonymous" list, as soon as the new handset is registered.
12. Steps (10) to (11) have to be repeated for all handsets.
 
* 
For security purposes, set the "Subscription Method" to "Disabled" in order to avoid inadvertent registrations at the IP DECT system.