help • 10 SwyxIt! Configuration • User Profile • Ringing • Number Dependent Ringing Sounds
10.2.7.1 Number Dependent Ringing Sounds
Depending on the number of the caller, SwyxIt! can select different ringing sounds. Alternatively you can also enter your extension here. In this case it will ring differently depending on the extension called.
To define different ringing sounds
1 Click on and on User profile.
or
1 Press the key combination Alt + Shift + U.
*The Properties of... window appears, which contains several tabs with settings.
2 Select the Ringing tab.
3 On this tab you will find all numbers or number masks with the ringing sounds assigned to them. You can change or delete the existing entries or add new entries.
4 Click on Add... to define a special ringing sound.
5 Define the name and number of the caller.
Alternatively you can enter one of your extensions or MSNs here. In this case, the ringing sound is selected if this extension is called.
You can use the placeholders "*" for more than one character, "?" for exactly one character.
The ringing sound selected is always the one providing the best possible match.
6 Define the ringing sound. To do this select a file from the drop-down list, look for a sound or record a sound here.
7 Define the interval between the two rings.
8 Select the volume of the ringing sound.
If necessary, use the slider to increase or reduce the volume of this ringing in relation to the volume setting in the menu Ringing Audio Configuration ( To configure the settings for the use of the audio devices).
9 Click on OK.
10 You return to the Ringing tab.
11 Activate Attention tone for signaled calls (pick up) in order to receive a warning signal if the call has not been picked up by the subscriber originally called within 10 seconds, see 1.3 Call Signaling.
12 Define whether you would like to hear a call waiting tone in the handset when a second call is received.
If the checkbox is not activated, a secondary call will only be signaled on the PC interface (silent secondary call signaling).
13 Under CTI Devices Ringing you can define which terminal device rings when SwyxIt! is in CTI mode. You can select between:
*only the controlling CTI SwyxIt! rings
*only the controlled device (SwyxIt! or SwyxPhone) rings
*both ring.
14 Click on OK.
* 
The ringing sounds for internal and external calls cannot be deleted, only changed.